设为首页 加入收藏 联系我们
网站首页 公司简介 产品展示 荣誉资质 新闻动态 应用案例 人才招聘 联系我们
今天是:
 
   
联系人:孙经理
手机:13563292291
电话:0632-2861819
邮箱:tzhuacheng@126.com
地址:滕州市滨湖镇工业区一号
   
 
新闻中心
 新闻中心2012-5-30
 新闻中心2012-5-30
 新闻中心2012-5-30
 新闻中心2012-5-30
 
资质荣誉
详情页
  
 

钢结构件Steel structure
· 对钢结构来说,腐蚀的速度主要与空气的相对湿度,以及大气中所含的污染成分有关。为防止或减少金属的腐蚀并延长其使用寿命,须对钢结构进行表面处理后,再通过涂刷和喷涂等方法,在金属表面形成保护膜,使金属与腐蚀介质隔离,从而防止金属的腐蚀。
For the steel structure, the rate of corrosion is mainly related to the relative humidity of the air, as well as the composition of the pollution in the atmosphere. In order to prevent or reduce metal corrosion and prolong its service life, to the surface treatment of steel structure, and then through the painting and spraying method, form a protective film on the metal surface, the metal corrosion and dielectric isolation, to prevent corrosion of metals.

船体分段Hull segmentation
· 船体分段喷砂用金属磨料的品质直接影响到涂装质量、小明2015永久免费平台喷砂效率、小明2015永久免费平台油漆、小明2015永久免费平台动能、小明2015永久免费平台磨料的消耗等质量和综合成本因素,随着新的涂层保护性能标准(PSPC)的出台,对分段喷砂质量提出了更高的要求,因此,金属磨料的品质在喷砂中尤为显得重要。Hull sandblasting abrasive quality directly affects the quality of coating, painting, sandblasting efficiency, kinetic energy, abrasive consumption quality and cost factors, with the new performance standard for protective coatings (PSPC) the introduction of subsection blasting quality put forward higher requirements, therefore, the quality of metal abrasive blasting which is particularly important.

港口机械Port machinery
· 港口码头建筑由于大量使用钢结构,因此对钢结构的耐蚀性要求非常高,尤其是港口机械常常濒临一些特殊的环境,譬如潮湿的海洋空气环境,在这种环境下所引发的钢结构建筑锈蚀现象非常的严重,这就需要使用相应的喷砂及涂料以完成对港口机械的保护。Port construction due to the extensive use of steel structure, so the corrosion resistance of the steel structure is very high, especially in port machinery often on the brink of some special circumstances, such as marine air wet environment, steel structure corrosion phenomenon in this environment is very serious, which requires the use of sandblasting and coating corresponding to complete protection of port machinery.

集装箱Container
· 集装箱箱体焊接好后,对箱体进行喷砂,清理焊缝的同时使箱体表面产生一定的粗糙度,增加涂装耐蚀性,一边能够长期在船舶、小明2015永久免费平台底盘车、小明2015永久免费平台火车、小明2015永久免费平台铁路车辆之间进行周转。
Container welding after blasting to weld the box, while cleaning up the surface of the box body has a certain roughness, the corrosion resistance of the coating increases, while long-term turnover among ships, car, train, railway vehicle chassis.

风电设备Steel structure
· 风电产品对表面处理有特定的粗糙度、小明2015永久免费平台清洁等级要求,产品表面处理后需在户外经历长久的多种天气变化,因此表面的喷砂处理尤为关键。
Wind power products on the surface of the surface treatment has a specific roughness, cleaning grade requirements, product surface treatment after a long time in the outdoor experience of a variety of weather changes, so the surface of the sand blasting treatment is particularly critical.

机车车辆Locomotive and rolling stock
· 机车在完成制造及大修后,需对机车表面进行喷漆(包括底漆、小明2015永久免费平台中涂、小明2015永久免费平台面漆等),以提高机车外观装饰性和使用寿命。金属磨料的选用对表面处理十分关键,影响涂层的抗裂纹、小明2015永久免费平台抗渗透、小明2015永久免费平台耐腐蚀性。
At the completion of manufacturing and locomotive overhaul, the locomotive surface paint (including paint primer, coating, etc.), in order to improve the decorative appearance and use life of locomotive. The selection of metal abrasive material is very critical to the surface treatment, which affects the crack resistance, penetration resistance and corrosion resistance of the coating.

 

强化Strengthen
喷丸强化Shot peening
· 任何凡是在交变载荷下运转的,受到循环应力作用的金属零部件都需要依靠喷(抛)丸强化工艺来提高零部件疲劳寿命。
Any metal parts that operate under alternating load and are subjected to cyclic stress should depend on the process of spraying (polishing) pill to improve the fatigue life of the components.
· 应用领域:喷/抛丸强化主要用于弹簧、小明2015永久免费平台板簧、小明2015永久免费平台扭杆、小明2015永久免费平台齿轮、小明2015永久免费平台传动元件、小明2015永久免费平台轴承、小明2015永久免费平台凸轮轴、小明2015永久免费平台曲轴、小明2015永久免费平台连杆等关键零件的强化处理。
Descends when the airpalane,the landing gear must withstand the formidable impulse; The wing also must the periodicity make stress-relieving processing.

石材切割Shot peening
· 利用金属磨料及加水射流的动能对花岗岩等石材进行切削,切割过程中无化学变化,具有对切割材质理化性质无影响、小明2015永久免费平台无热变形、小明2015永久免费平台切缝窄、小明2015永久免费平台精度高、小明2015永久免费平台切面逛街、小明2015永久免费平台清洁无污染等优点。
The use of metal abrasive water jet cutting and the kinetic energy of granite stone, no chemical changes in the process of cutting, cutting of material physical and chemical properties had no effect, no heat deformation, the advantages of high precision, narrow kerf, cut and free shopping.

 
 
  友情链接:暂无链接 
 
 
版权所有:滕州市小明2015永久免费平台金属制品有限公司 技术支持::新视野科技    【管理入口
联系人:孙经理  电话:0632-2861819 13563292291  地址:滕州市滨湖镇工业区一号  鲁ICP备